Overview
Required Tools
- Small screwdriver (optional)
- Sandpaper (optional, for smoothing any rough edges)
Material Information
Printed in durable PLA material with a non-slip base. The hinge mechanism is designed for smooth adjustment while maintaining stability.
Assembly Steps
Video Tutorial
Watch Assembly VideoAbout This Assembly
This adjustable phone stand consists of 5 main parts designed to support your device at multiple viewing angles. The assembly process is straightforward and requires no special tools.
Step 1: Part Inspection
Check all components: base, support arm, phone cradle, hinge mechanisms (2). Make sure all parts are clean and free of debris.
Troubleshooting
Hinges Too Tight
Gently flex the hinges through their full range of motion several times to loosen them. If still tight, lightly sand the connection points.
Hinges Too Loose
If the stand won't hold position, the hinges may be too loose. Apply a small piece of tape to the hinge connection to increase friction.
Phone Slipping in Cradle
Clean the cradle with a slightly damp cloth to remove any dust or oils that may reduce grip.
Pro Tips
- For extra stability on smooth surfaces, consider adding small rubber feet to the base (not included)
- The stand works in both portrait and landscape orientations
- For larger devices, adjust to a lower angle to maintain stability
- Clean occasionally to maintain the non-slip properties of the cradle